[1976]
1. T. Mizoguchi, T. Sato, T. Okabe, New Sulfur-Oxidizing Bacteria Capable of Growin Hetetrotropically, Thiobacillus rubellus nov. sp. and Thiobacillus delicatus nov. sp., J. Ferment. Technol., 54, 181-185 (1976).
2. T. Sato, T. Mizoguchi, T. Okabe, Oxidation of Inorganic Sulfur Compounds by Thiobacilli, J. Ferment. Technol., 54, 361-365 (1976).
3. T. Sato, K. Aida, COD of Aqeous Solution Containing Low Valence Sulfur Compounds., Ryusan-to-Kogyo, 29, 69-75 (1976).
[1977]
4. T. Sato, T. Okabe, The Formation of Dithionate the Reaction of Oxygen and Sulfites in Aqueous Solution, NIPPON KAGAKU KAISHI, 8, 1124-1130 (1977).
[1978]
5. T. Sato, Analysis of N-S Compounds Produced in Wet Type Desulfurization and Denitrification Processes, Ryusan-to-Kogyo，32, 95-99 (1978).
6. T. Sato, T. Simizu, T. Okabe, The Formation of Dithionate by the Reaction of Fe(Ⅲ)-edta with Sodium Sulfite, NIPPON KAGAKU KAISHI, 3, 361-366 (1978).
7. T. Sato, T. Suda, H. Uchida, T. Okabe, Solubility of Hexaamminenickel(II) Complexes in Aqueous Ammonia Solution and the Thermal Decomposition of Ammine Complexes of Nickel(II), Bull. Chem. Soc. Japan, 51, 2310-2316 (1978).
8. T. Sato, K. Aida, T. Komatsubara, T. Okabe, Alkaline and Acid Hydrolysis of Sodium Dithionate, NIPPON KAGAKU KAISHI, 9, 1221-1227 (1978).
[1979]
9. T. Sato, S. Mtani, T. Okabe, The Oxidation of Sodium Sulfite with Nitrogen Dioxide. With Special Reference to Analytical Methods for Nitrogen-Sulfur Compounds Produced in the Reaction System, NIPPON KAGAKU KAISHI, 7, 869-878 (1979).
[1980]
10. T. Sato, T. Yokoshima, T. Okabe, The Oxidation of Sodium Sulfite with Nitrogen Monoxide in the Presence of Fe(II)-edta, NIPPON KAGAKU KAISHI, 2, 181-187 (1980).
[1981]
11. T. Sato, M. Kato, T. Okabe, The Solubility of Metal(Ⅱ) Amine Complexes in Aqueous Sodium Chloride Solutions, NIPPON KAGAKU KAISHI, 7 , 1082-1086 (1981).
12. T. Sato, T. Okabe, Thermal Decomposition and Hydrolysis of Metal(II) Amine Complexes, NIPPON KAGAKU KAISHI,7, 1087-1092 (1981).
[1983]
13. T. Sato, T. Okabe, Precipitation-Spectrophotometric Determination of Dithionate Ions with Bis(diethylenetriamine)nickel(II) Chloride Solution, Bull. Chem. Soc. Japan, 56, 3511-3512 (1983).
14. T. Sato, F. Lawson, Differential Leaching of Some Smelter Slags with Sulfurous Acid and Oxygen Mixture, Hydrometallurgy, 11, 371-388 (1983).
[1984]
15. E. Narita, T. Sato, T. Shioya, M. Ikari, T. Okabe, Formation of Hydroxylamidobis(sulfate) Ion by the Adsorption of NO in Aqueous Solutions of Na2SO3Containing FeII-edta Complex, Ind. Eng. Chem. Prod. Res. Dev., 23, 262-265 (1984).
16. T. Sato, M. Shimada, Crystalline Phase Change in Yttria-Partially-Stabilized Zirconia by Low-Temperature Annealing, J. Amer. Ceram. Soc., 67, C212-C213 (1984).
17. T. Sato, T.Goto, F. Lawson, T. Okabe, The Oxidation of Iron(II) Sulfate with Sulfur Dioxide and Oxygen Mixture, Bull. Chem. Soc. Japan, 57, 2082-2086 (1984).
[1985]
18. T. Sato, S. Ohtaki, M. Shimada, Transformation of Yttria Partially Stabilized Zirconia by Low Temperature Annealing in Air, J. Mater. Sci., 20, 1466-1470(1985).
19. T. Sato, M. Shimada, Transformation of Yttria-Doped Tetragonal ZrO2 Polycrystals by Annealing in Water, J. Amer. Ceram. Soc., 68, 356-359 (1985).
20. T. Sato, H. Takizawa, M. Shimada, Preparation and Electrical Properties of (M1-xM’x)Si2 (M, M’=Cr, Mn, Fe) (0<x<0.3), Physica Status Solid (a), 90, K82-K86 (1985).
21. T. Sato, N. Morita, M. Shimada, Synthesis and Electrical Properties of LixMg1-xM2O4 (M=Ti, V) (0<x<1.0), Physica Status Solidi (a), 91, K81-K85 (1985).
22. T. Sato, M. Shimada, Transformation of Ceria-Doped Tetragonal Zirconia Polycrystals by Annealing in Water, Amer. Ceram. Soc. Bull., 64, 1382-1384 (1985).
23. T. Sato, M. Shimada, Control of the Tetragonal-to-Monoclinic Phase Transformation of Yttria Partially Stabilized Zirconia in Hot Water, J. Mater. Sci., 20, 3988-3992 (1985).
24. T. Sato, S. Ohtaki, T. Endo, M. Shimada, Transformation of Yttria-Doped Tetragonal ZrO2 Polycrystals by Annealing in Controlled Humidity Conditions, J. Amer. Ceram. Soc.,68, C320-C322 (1985).
[1986]
25. T. Sato, Y. Kanno, T. Endo, M. Shimada, Corrosion of SiC, Si3N4 and AIN in Molten K2CO2 and K2SO4 and K2CO3Salts, Yogyo-Kyokai-Shi, 94 , 123-138 (1986).
26. T. Sato, T. Wakabayashi, M. Shimada, Absorption of Various Anions by Magnesium Aluminium Oxide of Mg0.7Al0.3O1.15, Ind. Eng. Chem. Prod. Res. Dev., 25, 89-92 (1986).
27. T. Sato, M. Ishitsuka, M. Shimada, Sintering and Characterization of Mullite-Alumina Composites, Ceram. International, 12, 61-66 (1986).
28. T. Sato, A. Shiratori, M. Shimada, Sintering and Fracture Behavior of Composites Based on Alumina-Zirconia (Yttria)–Nonoxides, J. de Physiqu-Colluque, 47, C1 733-737 (1986).
29. T. Sato, C. Hsien-Chang, T. Endo, M. Shimada, Preparation and Electrical Properties of LixM1-xO (M=Ni, Co), J. Mater. Sci. Lett., 5, 552-554 (1986).
30. T. Endo, T. Sato, M. Shimada, Fluorecence Properties of the Dye-Intercalated Smectite, J. Phys. Chem. Solid, 47, 799-804 (1986).
31. T. Sato, S. Ohtaki, T. Endo, M. Shimada, Improvement of Thermal Stability of Yttria-Doped Tetragonal Zirconia Polycrystals by Alloying with Various Oxides, Inter. J. High Tech. Ceram., 2 , 167-177 (1986).
32. T. Sato, S. Ohtaki, T. Endo, M. Shimada, Improvement of Themal Stability of Yttria-Doped Tetragonal Zirconia Polycrystals by Doping CeO2 on the Surface, J. Mater. Sci. Lett., 5, 1140-1142 (1986).
33. T. Sato, M. Shimada, Control of the Tetragonal-to-Monoclinic Phase Transformation of Yttria-Doped Tetragonal ZrO2 Polycrystals by Annealing in Water.,Special Ceramics 8, 151-158 (1986).
34. T. Sato, K. Kato, T. Endo, M. Shimada, Preparation and Chemical Properties of Magnesium Aluminium Oxide Solid Solutions, Reactivity of Solids, 2, 253-260 (1986).
35. T. Sato, Y. Kanno, M. Shimada, Corrosion of SiC, Si3N4 and AlN in Molten K2SO4-K2CO3 Salts, Int. J. High Tech. Ceram., 2, 279-290 (1986).
36. T. Endo, H. Nagayama, T. Sato, M. Shimada, Crystal Growth of Potassium Titanate in the system K2O-Fe2O3-TiO2, J. Crystal Growth, 78, 423-430 (1986).
[1987]
37. T. Sato, S. Ohtaki, T. Endo, M. Shimada, Transformation of Tetragonal Zirconia Polycrystals by Annealing under Humidity Controlled Conditions., ZAIRYO, 36, 7-11 (1987).
38. M. Ishitsuka, T. Sato, T. Endo, M. Shimada, Synthesis and Thermal Stability of Aluminium Titanate Solid Solutions, J. Amer. Ceram. Soc., 70, 69-71 (1987).
39. T. Sato, H. Fujishiro, T. Endo, M. Shimada, Thermal Stability and Mechanical Properties of Yttria-Doped Tetragonal Zirconia Polycrystals Dispersed Alumina and Silicon Carbide Particles, J. Mater. Sci., 22, 882-886 (1987).
40. T. Sato, S. Ohtaki, T. Endo, M. Shimada, Humidity Dependence of the Phase Transformation from Tetragonal to Monoclinic Phase in Yttria-Doped Tetragonal Zirconia, High Tech. Ceram., 38A, 281-288 (1987).
41. T. Endo, T. Sato and M. Shimada, High Pressure Synthesis and Sintering of B2O with Diamond-Type Structure, High Tech. Ceram., 38C, 2113-2118 (1987).
42. T. Endo, N. Nakada, T. Sato, M. Shimada, Intercalation of Rhodamine and Pyronin into Montmorillonite, High Tech. Ceram., 38C, 2623-2118 (1987).
43. T. Endo, T. Sato, M. Shimada, High-Pressure Synthesis of B2O with Diamond-like Structure, J. Mater. Sci. Lett., 6, 683-685 (1987).
44. N. Morita, T. Endo, T. Sato, M. Shimada, The Oxidation State of Antimony and Electrical Properties in Antimony-Doped Rutile, J. Solid State Chem., 68, 106-111 (1987).
45. T. Sato, Y. Kanno, T. Endo, M. Shimada, Corrosion of Si3N4 in Molten Alkali Sulfate and Carbonate, Adv. Ceram. Mater., 2, 228-231 (1987).
46. T. Sato, K. Haryu, T. Endo, M. Shimada, High Temperature Oxidation of Hot-Pressed Aluminium Nitride by Water Vapour, J. Mater. Sci., 22, 2277-2280 (1987).
47. T. Sato, K. Haryu, T. Endo, M. Shimada, High Temperature Oxidation of Silicon Nitride-Based Ceramics by Water Vapour, J. Mater. Sci., 22, 2635-2640 (1987).
48. N. Morita, T. Endo, T. Sato, M. Shimada, TiF2 with Fluorite Structure – A New Compound, J. Mater. Sci. Lett.,6, 859-861 (1987).
49. H. Takizawa, T. Sato,T. Endo, M. Shimada, High-Pressure Synthesis and Electrical Properties of Mn3Ge5 with Mn11Si19-Type Structure, J. Solid State Chem., 68, 234-238 (1987).
50. T. Sato, S. Ohtaki, T. Fukushima, T. Endo, M. Shimada,Mechanical Properties and Thermal Stability of Yttria-Doped Tetragonal Zirconia Polycrystals with Diffused Ceria in the Surface, Advanced Structural Ceramics, 147-154 (1987).
51. T. Sato, M. Tezuka, T. Endo, M. Shimada, Removal of Sulfuroxyanions by Magnesium Aluminium Oxides and their Thermal Decomposition, J. Chem. Tech. Biotech., 39, 275-285 (1987).
52. T. Sato, M. Tezuka, T. Endo, M. Shimada, Kinetics of Anion Uptake by Rock Salt-Type Magnesium Aluminium Oxide Solid Solutions, Reactivity of Solids, 3, 287-295 (1987).
53. M. Ishitsuka, T. Sato, T. Endo, M. Shimada, Sintering and Mechanical Properties of Yttria-Doped Tetragonal ZrO2Polycrystals/Mullite Composites, J. Amer. Ceram. Soc., 70, C342-C346 (1987).
54. T. Sato, T. Fukushima, T. Endo, M. Shimada, Thermal Shock Resistance of Yttria-Doped Tetragonal Zirconia Polycrystals: Effect of Solvent in Quenching Test, J. Mater. Sci. Lett., 6, 1287-1290 (1987).
[1988]
55. T. Sato, K. Haryu, T. Endo, M. Shimada, Corrosion of Nonoxide Ceramics by High Temperature Water Vapor, ZAIRYO, 37, 77-82 (1988).
56. H. Takizawa, T. Sato, T. Endo, M. Shimada, High-Pressure Synthesis and Electrical and Magnetic Properties of MnGe and CoGe withthe Cubic B20 Structures, J. Solid State Chem., 73, 40-46 (1988).
57. T. Endo, N. Morita, T. Sato, M. Shimada, The Preparation and Electrical Properties of TiO2-xFx, J. Mater. Res., 3, 392-397 (1988).
58. T. Sato, T. Endo, M. Shimada, Control of the Tetragonal to Monoclinic Phase Transformation of Yttria-Doped Tetragonal ZrO2 Polycrystalsby Annealing in Water, Ceram. Microstructure ‘86, 215-222 (1988).
59. T. Endo, H. Nagayama, T. Sato, M. Shimada,Crystallization of Potassium Titanate from the Amorphous Phase, J. Mater. Sci., 23, 694-698 (1988).
60. T. Sato, Y. Koike, T. Endo, M. Shimada, Corrosion and Strength Degradation of Si3N4 and Sialons in K2CO3 and K2SO4 Melts, J. Mater. Sci., 23, 1405-1410 (1988).
61. H. Takizawa, T. Sato, T. Endo, M. Shimada, High-Pressure Synthesis and Crystal Structure of VGe2 and Cr4Ge, J. Solid State Chem., 73, 427-432 (1988).
62. T. Endo, H. Nagayama, T. Sato, M. Shimada, Preparation of Fibrous Potassium Titanate Crystals, Ceram. Trans. Ceram. Powder Sci. II, 1, 218-225 (1988).
63. T. Endo, N. Igawa, T. Sato, M. Shimada, The Synthesis of Aluminium Oxide Cross-Linked Montmorillonite and Its Catalytic Properties, Clay Sci., 7, 59-72 (1988).
64. T. Sato, H. Fujita, T. Endo, M. Shimada, Synthesis of Hydrotalcite-like Compounds and Their Physico-Chemical Properties, Reactivity of Solids, 5, 219-228 (1988).
65. T. Sato, M. Ishitsuka, T. Fukushima, T. Endo, M. Shimada, Thermal Shock Resistance of Yttria-Doped Tetragonal Zirconia Polycrystals, Mater. Sci. Forum, 34-36, 189-193 (1988).
66. T. Sato, Y. Koike, T. Endo, M. Shimada, The Effect of Corrosion and Degradation on Fracture Strength of Si3N4-Based Ceramics by Molten K2SO4and K2CO3 Salts, Mater. Sci. Forum, 34-36, 645-649 (1988).
67. T. Sato, M. Ishitsuka, M. Shimada, Thermal Shock Resistance of ZrO2 Based Ceramics, Mater. Design, 9, 204-212 (1988).
68. T. Sato, T. Fukushima, T. Endo, M. Shimada, Thermal Stability and Mechanical Properties of Yttria and Ceria Doped Zirconia/Alumina Composites, Sci. Ceram., 14, 843-848 (1988).
69. T. Endo, N. Nakada, T. Sato, M. Shimada, Fluorescence of Clay-Intercalated Xanthene Dyes, J. Phys. Chem. Solids,49, 1423-1428 (1988).
70. T. Sato, Y. Tokunaga, T. Endo, M. Shimada, K. Komeya, K. Nishida, K. Komatsu, T. Kameda, Corrosion of Silicon Nitride Ceramics in Aqueous HF Solutions, J. Mater. Sci.,23, 3440-3446 (1988).
71. T. Sato, Y. Tokunaga, T. Endo, M. Shimada, K. Komeya, K. Nishida, K. Komatsu, T. Kameda, Corrosion of Silicon Nitride Ceramics in Aqueous Hydrogen Chloride Solutions, J. Amer. Ceram. Soc., 71, 1074-1079 (1988).
72. T. Sato, S. Ohtaki, T. Endo, M. Shimada, Improvement to the Thermal Stability of Yttria-Doped Tetragonal Zirconia Polycrystals by Allowing with Various Oxides, Adv. Ceram.,24, Sci. Tech. Zirconia III, 29-37 (1988)
73. T. Sato, S. Ohtaki, T. Endo, M. Shimada, Changes in Crystalline Phase and Microstructure on the Surface of Yttria-Doped Tetragonal Zirconia Polycrystals (Y-TZP) by Annealing in Humid Conditions, Adv. Ceram., 24, Sci. Tech. Zirconia III, 501-508 (1988).
[1989]
74. T. Sato, Y. Koike, T. Endo, M. Shimada, Strength Degradation of Si3N4 Ceramics by Alkali Salt Melt Corrosion, ZAIRYO, 38, 39-43 (1989).
75. T. Endo, N. Nakada, T. Sato, M. Shimada, The Fluorescence Properties of Coumarine Dye Intercalated in Swelling Clay, J. Phys. Chem. Solids, 50, 133-137 (1989).
76. T. Endo, A. Shibuya, T. Sato, M. Shimada, Synthesis and Fluorescence Properties of Tb2Te4O11, J. Solid State Chem., 78, 237-241 (1989).
77. H. Taguchi, M. Nagoya, T. Sato, M. Shimada, High-Temperature Phase Transition of CaMnO3-δ, J. Solid State Chem., 78, 312-315 (1989).
78. T. Sato, T. Endo, M. Shimada, Postsintering Hot Isostatic Pressing of Ceria-Doped Tetragonal Zirconia/Alumina Composites in an Argon-Oxygen Gas Atmosphere, J. Amer. Ceram. Soc., 72, 761-764 (1989).
79. M. Ishitsuka, T. Sato, T. Endo, M. Shimada, Raman Microprobe Spectroscopic Studies on Thermal Shock Fracture of ZrO2-Based Ceramics, J. Mater. Sci. Lett., 8, 638-640 (1989).
80. T. Sato, T. Endo, M. Shimada, Post-Sintering Hot Isostatic Pressing of Ceria-Doped Tetragonal Zirconia/Alumina Composites, Zirconia 88 Adv. Zirconia Sci. Tech., 293-300(1989).
81. M. Ishitsuka, T. Sato, T. Endo, M. Shimada, Thermal Shock Fracture Behaviour of ZrO2 Based Ceramics, J. Mater. Sci., 24, 4057-4061 (1989).
82. T. Sato, T. Endo, M. Shimada, Hot-Isostatic Pressing of Yttria and Ceria Doped Zirconia/Alumina Composites in Oxygen Atmosphere, Adv. Mater. Structural Ceram., 5, 75-80 (1989).
83. M. Shimada, T. Sato, Y. Koike, T. Endo, Corrosion and Degradation in Strength of Silicon Nitride Based Ceramics by Alkali Sulfate and Carbonate Melts, Adv. Mater. Structural Ceram., 4, 319-324 (1989).
84. M. Shimada, T. Sato, Y. Koike, T. Endo, Strength Degradation of Silicon Nitride Based Ceramics by Hot Corrosion in Alkali Sulfate and Carbonate Melts, Ceram. Mater. Components Engine, 831-840 (1989).