Publications

TOPページ >  Publications

論文発表

(2022)
J. Nozawa, S. Uda, H. Niinomi, J. Okada, K. Fujiwara
“Heteroepitaxial Growth of Colloidal Crystals: Growth Mode Dependence on the Interparticle Interactions and Lattice Spacing”
J. Phys. Chem. Lett., 2022, in press
[DOI:]

H. Niinomi, A. Kouch, T. Hama, H. Nada, T. Yamazaki, Y. Kimura
“Low- and High-Density Unknown Waters at Ice–Water Interfaces”
J. Phys. Chem. Lett., 2022, 13, 4251–4256.
[DOI:10.1021/acs.jpclett.2c00660]

T. Yamazaki, H. Niinomi, Y. Kimura
“Feasibility of control of particle assembly by dielectrophoresis in liquid-cell transmission electron microscopy”
Microscopy, 2022, 00, 1–7.
[DOI:10.1093/jmicro/dfac021]

M. Nakagawa
“Micro-print and nano-imprint methods combining laser-drilled screen printing and ultraviolet nanoimprint lithography: a review”
Jpn. J. Appl. Phys., 2022, 61, SD0805.
[DOI:10.35848/1347-4065/ac575f]

K. Chiba, M. Nakagawa
“Nondestructive x-ray reflectivity analysis of Al distributions of ultraviolet-cured spin-coated resist films hybridized with trimethylaluminum”
J. Vac. Sci. Technol. B, 2022, 40, 032601.
[DOI:10.1116/6.0001747]

(2021)
C Miyajima, S Ito, M Nakagawa
“Selective dry etching of UV-nanoimprinted resin passivation masks for area selective atomic layer deposition of aluminum oxide”
J. Vac. Sci. Technol. B, 2021, 39, 052804.
[DOI:10.1116/6.0001250]

S Ito, Y Seto, J Kumaki, M Nakagawa
“Macromolecular Chain Structures of Atactic Poly (methyl methacrylate) Visualized on Hydrophilized Graphene Surfaces by Atomic Force Microscopy”
Chem. Lett., 2021, 50, 1403-1406.
[DOI:10.1246/cl.210143]

Shunya Ito, Toshiyuki Omori, Masao Ando, Hiroyuki Yamazaki, Masaru Nakagawa
“Plastic deformation of synthetic quartz nanopillars by nanoindentation for multi-scale and multi-level security artefact metrics”
Sci. Rep., 2021, 11, 16550.
[DOI:10.1038/s41598-021-95953-0]

Yusuke Isawa, Takahiro Nakamura, Shunya Ito, Masaru Nakagawa
“Single pulse development of chromium-deposited imprint micro/nano patterns of photo-cured crosslinked resin using a femtosecond pulsed laser”
Jpn. J. Appl. Phys., 2021, 60, SCCJ02.

Chiaki Miyajima, Shunya Ito, Masaru Nakagawa
“Suppression of resist pattern collapse by crosslinker in ultraviolet nanoimprinting involving sequential infiltration synthesis with trimethylaluminum”
J. Vac. Sci. Technol. B, 2021, 39, 032603.
[DOI:10.1116/6.0001014]

(2020)
Masaru Nakagawa, Kazue Sutou, Toshiaki Hayakawa
“Reproduction of additive-type fluorescence moiré fringes by image drawing software and study of accuracy of fluorescence imprint alignment”
Jpn. J. Appl. Phys., 2020, 59, SIIJ11
[DOI:10.35848/1347-4065/ab7ae1]

Takuma Yoshida, Shunya Ito, Kento Ochiai, Takahiro Nakamura, Masaru Nakagawa
“Fluorescence imprint alignment using additive-type inclination moiré fringe”
Jpn. J. Appl. Phys., 2020, 59, SIIJ04
[DOI:10.35848/1347-4065/ab7415]

Shunya Ito, Takahiro Nakamura, Masaru Nakagawa
“Organic–Inorganic Hybrid Replica Molds with High Mechanical Strength for Step-and-Repeat Ultraviolet Nanoimprinting”
Bull. Chem. Soc Jpn., 2020, 93, 862-869
[DOI:10.1246/bcsj.20200093]

Shunya Ito, Yuki Ozaki, Takahiro Nakamura, Masaru Nakagawa
“Depth profiles of aluminum component in sequential infiltration synthesis-treated electron beam resist films analyzed by time-of-flight secondary ion mass spectrometry”
Jpn. J. Appl. Phys., 2020, 59, SIIC03
[DOI:10.35848/1347-4065/ab8a0a]

Yuki Horikawa, Takuya Okamoto, Takahiro Nakamura, Yuhei O. Tahara, Makoto Miyata, Shingo Ikeda, Kenji Sakota, Tomoyuki Yatsuhashi
“Synthesis of iron-based nanoparticles from ferrocene by femtosecond laser irradiation: Suppression of the particle growth in a mixture of water and hexane”
Chem. Phys. Lett., 2020, 750, 137504
[DOI:10.1016/j.cplett.2020.137504]

Teppei Nishi, Shunsuke Sato, Ayako Ohshima, Takahiro Nakamura, Shunichi Sato, Takeshi Morikawa
“Formation of C2 organic molecules from CO2 and H2O by femtosecond laser induced chemical reactions in water”
Jpn. J. Appl. Phys., 2020, 59, 057001
[DOI:10.35848/1347-4065/ab87de]

(2019)
S. Kubo, M. Kumagai, N. Kawatsuki, M. Nakagawa
“Photoinduced reorientation in thin films of a nematic liquid crystalline polymer anchored to interfaces and enhancement using small liquid crystalline molecules”
Langmuir, 2019, 35(44), 14222-14229
[DOI:10.1021/acs.langmuir.9b02673]

S. Ito, M. Kasuya, K. Kurihara, M. Nakagawa
“Selection of a polymerizable functional group of an adhesive monolayer to suppress increases in monomer viscosity under confinement in silica nano-gaps”
Chem. Lett., 2019, 48(8), 943-946
[DOI:10.1246/cl.190273]

Y. Ozaki, S. Ito, T. Nakamura, M. Nakagawa
“Sequential infiltration synthesis- and solvent annealing-induced morphological changes in positive-tone e-beam resist patterns evaluated by atomic force microscopy”
Jpn. J. Appl. Phys., 2019, 58, SDDJ04
[DOI:10.7567/1347-4065/ab0496]

T. Nakamura, N. Endo, S. Ito, R. Kuroda, M. Nakagawa
“Surface modification of polyimide laser-drilled screen-printing masks for low-viscosity liquids in print-and-imprint method”
Jpn. J. Appl. Phys., 2019, 58, SDDJ06
[DOI:10.7567/1347-4065/ab138c]

(2018)
M. Nakagawa, T. Uehara, Y. Ozaki, T. Nakamura, S. Ito
“Visualization of organic/inorganic hybridization of UV-cured films with trimethylaluminum by scanning transmission electron microscopy and energy dispersive X-ray spectroscopy”
J. Vac. Sci. Technol. B, 2018, 36(6), 06JF02
[DOI:10.1116/1.5047822]

H. Zhang, T. Aoki, K. Hatano, K. Kabayama, M. Nakagawa, K. Fukase, Y. Okamura
“Porous nanosheet wrapping for live imaging of suspension cells”
J. Mater. Chem. B, 2018, 6, 6622-6628
[DOI:10.1039/C8TB01943F]

T. Nakamura, K. Seki, K. Nagase, M. Nakagawa
“Pulsed laser drilling of engineering plastic films to fabricate through-hole membranes for print-and-imprint method”
Trans. Mat. Res. Soc. Japan, 2018, 43(5), 289-292
[DOI:10.14723/tmrsj.43.289]

R. Kuroda, T. Nakamura, M. Nakagawa
“High-Intensity Laser Irradiation Inducing Au Nanoparticles in Viscous Glycerin”
Trans. Mat. Res. Soc. Japan, 2018, 43(5), 283-287
[DOI:10.14723/tmrsj.43.283]

S. Ito, M. Kasuya, K. Kawasaki, R. Washiya, Y.Shimazaki, A.Miyauchi, K.Kurihara, M. Nakagawa
“Selection of diacrylate monomers for sub-15 nm ultraviolet nanoimprinting by resonance shear measurement”
Langmuir, 2018, 34, 9366-9375
[DOI:10.1021/acs.langmuir.8b01881]

T. Nishi, Y. Hayasaka, T. Nakamura, T. Morikawa, S. Sato
“Core-shell like Au-Ir nanoparticles with spatially variant electronic state of Au synthesized by femtosecond laser irradiation of solution”
App. Surf. Sci., 2018, 457, 1044-1049
[DOI:10.1016/j.apsusc.2018.07.046]

T. Okamoto, T. Nakamura, R. Kihara, T. Asahi, K. Sakota, T. Yatsuhashi
“Synthesis of Bare Iron Nanoparticles from Ferrocene Hexane Solution by Femtosecond Laser Pulses”
ChemPhysChem, 2018, 19, 2480-2485
[DOI:10.1002/cphc.201800436]

K. Ochiai, E. Kikuchi, Y. Ishito, M. Kumagai, T. Nakamura, M. Nakagawa
“Development of UV-curable liquid for in-liquid fluorescence alignment in ultraviolet nanoimprint lithography”
Jpn. J. Appl. Phys., 2018, 57, 06HG02
[DOI:10.7567/JJAP.57.06HG02]

Y. Ozaki, S. Ito, N. Hiroshiba, T. Nakamura, M. Nakagawa
“Elemental depth profiles and plasma etching rates of positive-tone electron beam resists after sequential infiltration synthesis of alumina”
Jpn. J. Appl. Phys., 2018, 57, 06HG01
[DOI:10.7567/JJAP.57.06HG01]

S. Ito, M. Kasuya, K. Kurihara, M. Nakagawa
“Surface forces between hydrophilic silica surfaces in a moisture-sensitive oleophilic diacrylate monomer liquid”
AIP Advances, 2018, 8(2), 25122
[DOI:10.1063/1.4991630]

T. Uehara, S. Sato, S. Ito, H. Yano, T. Nakamura, M. Nakagawa
“Development of UV-curable resins suitable for reverse-tone lithography for Au metamaterials using a print and imprint method”
Bull. Chem. Soc. Jpn., 2018, 91, 178-186
[DOI:10.1246/bcsj.20170280]

(2017)
E. Kikuchi, Y. Ishito, S. Matsubara, T. Nakamura, M. Abe, M. Nakagawa
“Principle and observation of fluorescence moiré fringes for alignment in print and imprint methods”
J. Vac. Sci. Technol. B, 2017, 35, 06G303
[DOI:10.1116/1.4990844]

T. Nakamura, K. Seki, K. Nagase, M. Nakagawa
“Gold microelectrods fabricated by a print and imprint method with laser-drilled polyimide through-hole masks”
J. Vac. Sci. Technol. B, 2017, 35, 06G301
[DOI:10.1116/1.4991629]

S. Ito, E. Kikuchi, M. Watanabe, Y. Sugiyama, Y. Kanamori, M. Nakagawa
“Silica imprint templates with concave patterns from single-digit nanometers fabricated by electron beam lithography involving argon ion beam milling”
Jpn. J. Appl. Phys., 2017, 56, 06GL01
[DOI:10.7567/JJAP.56.06GL01]

T. Sodemura, S. Kubo, H. Higuchi, H. Kikuchi, M. Nakagawa
“Unimodal nematic liquid crystalline random copolymers designed for accepting chiral dopants”
Bull. Chem. Soc. Jpn., 2017, 90, 216-222
[DOI:10.1246/bcsj.20160343]

S. Ito, M. Kasuya, K. Kurihara, M. Nakagawa
“Nanometer-resolved fluidity of an oleophilic monomer between silica surfaces modified with fluorinated monolayers for nanoimprinting”
ACS Appl. Mater. Interfaces, 2017, 9, 6591-6598
[DOI:10.1021/acsami.6b15139]

M. Yasin, T. Nakamura, Y. Nishiyama, S. Sato
“Chemical surface modification of graphene oxide by femtosecond laser pulse irradiation in aqueous suspensions”
J. Mater. Sci., 2017, 52, 749-759
[DOI:10.1007/s10853-016-0368-8]

(2016)
M. Nakagawa, A. Nakaya, Y. Hoshikawa, S. Ito, N. Hiroshiba, T. Kyotani
“Size-Dependent Filling Behavior of UV-Curable Di(meth)acrylate Resins into Carbon-Coated Anodic Aluminum Oxide Pores of around 20 nm”
ACS Appl. Mater. Interfaces, 2016, 8, 30628-30634
[DOI:10.1021/acsami.6b10561]

A. Matsutani, F. Ishiwari, Y. Shoji, T. Kajitani, T. Uehara, M. Nakagawa, T. Fukushima
“Chlorine-based inductively coupled plasma etching of GaAs wafer using tripodal paraffinic triptycene as an etching resist mask”
Jpn. J. Appl. Phys., 2016, 55, 06GL01
[DOI:10.7567/JJAP.55.06GL01]

M. Nakagawa, S. Kaneko, S. Ito
“Demolding in Ultraviolet Nanoimprinting Assisted by a Nanoscale Lubricating Fluid Layer of Condensed Alternative Chlorofluorocarbon”
Bull. Chem. Soc. Jpn., 2016, 89, 786-793
[DOI:10.1246/bcsj.20160107]

S. Ito, H. Sato, Y. Tasaki, K. Watanuki, N. Nemoto, M. Nakagawa
“Durability to oxygen reactive ion etching enhanced by addition of synthesized bis(trimethylsilyl)phenyl-containing (meth)acrylates in ultraviolet nanoimprint lithography”
Jpn. J. Appl. Phys., 2016, 55, 06GM02
[DOI:10.7567/JJAP.55.06GM02]

A. Tanabe, T. Uehara, K. Nagase, H. Ikedo, N. Hiroshiba, T. Nakamura, M. Nakagawa
“Discharge of viscous UV-curable resin droplets by screen printing for UV nanoimprint lithography”
Jpn. J. Appl. Phys., 2016, 55, 06GM01
[DOI:10.7567/JJAP.55.06GM01]

T. Uehara, S. Kubo, N. Hiroshiba, M. Nakagawa
“Anisotropic oxygen reactive ion etching for removing a residual layer of 45-nm-linewidth imprint patterns”
J. Photopolym. Sci. and Technol.,2016, 29, 201-208
[DOI:10.2494/photopolymer.29.201]

N. Hiroshiba, R. Okubo, A. N. Hattori, H. Tanaka, M. Nakagawa
“Monitoring thermally induced cylindrical microphase separation of polystyrene-block-poly(methyl methacrylate) by atomic force microscopy”
J. Photopolym. Sci. and Technol., 2016, 29, 659-666
[DOI:10.2494/photopolymer.29.659]

T. Uehara, A. Onuma, A. Tanabe, K. Nagase, H. Ikedo, N. Hiroshiba, T. Nakamura, M. Nakagawa
“Viscosity range of UV-curable resins usable in print and imprint method for preparing sub-100-nm-wide resin patterns”
J. Vac. Sci. Technol. B., 2016, 34, 06K404
[DOI:10.1116/1.4963374]

Y. Ishito, H. Yano, N. Hiroshiba, S. Kubo, M. Nakagawa
“Condition Determination of Ultraviolet Light Exposure for High-Throughput Nanoimprinting”
Chem. Lett., 2016, 45, 1373-1375
[DOI:10.1246/cl.160663]

(2015)
M. Nakagawa, K. Kobayashi, A. Hattori, S. Ito, N. Hiroshiba, S. Kubo, H. Tanaka
“Selection of di(meth)acrylate monomers for low pollution of fluorinated mold surfaces in ultraviolet nanoimprint lithography”
Langmuir, 2015, 31, 4188-4195
[DOI:10.1021/acs.langmuir.5b00325]

T. Uehara, S. Kubo, M. Nakagawa
“Reverse tone ultraviolet nanoimprint lithography with fluorescent UV-curable resins”
Jpn. J. Appl. Phys., 2015, 54, 06FM02
[DOI:10.7567/JJAP.54.06FM02]

S. Matsui, H. Hiroshima, Y. Hirai, M. Nakagawa
“Innovative nanoimprint lithography using a condensable alternative chlorofluorocarbon atmosphere”
Microelectron. Eng., 2015, 133, 134-155
[DOI:10.1016/j.mee.2014.10.016]

(2014)
S. Matsui, H. Hiroshima, Y. Hirai, M. Nakagawa,
“Breakthrough achievement in nanoimprint lithography using PFP condensable gas”
J. Photopolym. Sci. Technol., 2014, 27, 61-72
[DOI:10.2494/photopolymer.27.61]

S. Kubo, S. Kobayashi, S. Hadano, M. Komura, T. Iyoda, M. Nakagawa
“Directed self-assembly of nematic liquid crystalline polymers on a rubbed polyimide alignment layer”
Jpn. J. Appl. Phys., 2014, 53, 06JC04
[DOI:10.7567/JJAP.53.06JC04]

G. Tan, N. Inoue, T. Funabasama, M. Mita, N. Okuda, J. Mori, K. Koyama, S. Kaneko, M. Nakagawa, A. Matsuda, M. Yoshimoto
“Formation of 0.3-nm-high stepped polymer surface by thermal nanoimprinting”
Appl. Phys. Express, 2014, 7, 055202
[DOI:10.7567/APEX.7.055202]

S. Ito, S. Kaneko, C. M. Yun, K. Kobayashi, M. Nakagawa
“Investigation of fluorinated (meth)acrylate monomers and macromonomers suitable for a hydroxy-containing acrylate monomer in UV nanoimprinting”
Langmuir, 2014, 30, 7127-7133
[DOI:10.1021/la501629n]

S. Kubo, R. Taguchi, S. Hadano, M. Narita, O. Watanabe, T. Iyoda, M. Nakagawa
“Surface-assisted Unidirectional Orientation of ZnO Nanorods Hybridized with Nematic Liquid Crystals”
ACS Appl. Mater. Interfaces, 2014, 6, 811-818
[DOI:10.1246/cl.160663]

(2013)
T. Uehara, T. Tomioka, S. Kubo, M. Hoga, M. Nakagawa
“Fabrication of Gold Split-ring Resonator Arrays by Surface-assisted Ultraviolet Nanoimprint Lithography Using Hydroxy-terminated Alkanethiol Monolayers”
Chem. Lett. 42, 1475-1477 (2013)

Y. Yabiku, S. Kubo, M. Nakagawa, M. Vacha, S. Habuchi
“Super-resolution Fluorescence Imaging of Nanoimprinted Polymer Patterns by Selective Fluorophore Adsorption Combined with Redox Switching”
AIP Adv. 3, 102128 (2013)

T. Tomioka, S. Kubo, M. Nakagawa, M. Hoga, T. Tanaka
“Split-Ring Resonators Interacting with a Magnetic Field at Visible Frequencies”
Appl. Phys. Lett. 103, 071104 (2013)

F. S. Tan, O. Sugihara, T. Kaino
“New Approach on Multimode Polymer Optical Waveguides Evaluations”
J. Lightwave Technol. 31, 1994-2000 (2013)

T. Uehara, M. Nakagawa, O. Sugihara
“Preparation of UV-cured organic–inorganic hybrid materials with low refractive index for multilayer film application”
Opt. Mater. Express 3, 1351-1357 (2013)

[Selected Paper] H. Oda, K. Onda, and M. Nakagawa
“Photochemical Grafting Reactions of a Benzophenone-Containing Alkylthiol Monolayer on Au with Deuterated Polystyrene”
Bull. Chem. Soc. Jpn. 86, 1035-1040 (2013)

H. Hiroshima, M. Nakagawa, Y. Hirai, S. Matsui
“Innovative Nanoimprint Lithography Using PFP Condensable Gas”
J. Photopolym. Sci. Technol. 26, 87-96 (2013)

R. Taguchi, S. Kubo, S. Hadano, T. Iyoda, M. Nakagawa
“Liquid Crystallinity or Random Copolymers of Polymethacrylates Containing Biphenyl Moieties Synthesized by Atom Transfer Radical Polymerization”
Mol. Cryst. Liq. Cryst. 579, 30-33 (2013)

C. M. Yun, Y. Nagase, M. Nakagawa
“Gas permeability of patterned polydimethylsiloxane-grafted polyimide membranes fabricated by nanocasting method”
Mol. Cryst. Liq. Cryst. 580, 35-38 (2013)

S. Kubo, T. Tomioka, M. Nakagawa
“Resolution Limits of Nanoimprinted Patterns by Fluorescence Microscopy”
Jpn. J. Appl. Phys. 52, 06GJ01 (2013)

S. Iyoshi, M. Okada, T. Katase, K. Tone, K. Kobayashi, S. Kaneko, Y. Haruyama, M. Nakagawa, H. Hiroshima, S. Matsui
“Study of Demolding Characteristics in Step-and-Repeat Ultraviolet Nanoimprinting”
Jpn. J. Appl. Phys. 52, 06GJ04 (2013)

(2012)
M. Nakagawa, A. Endo, Y. Tsukidate
“Investigation of Nonreactive Fluoroalkyl-containing Surfactants for Reducing Release Energy of Ultraviolet-cured Acrylate Resins”
J. Vac. Sci. Technol. B 30, 06FB10 (2012)

S. Ito, C. M. Yun, K. Kobayashi, M. Nakagawa
“Release Layer-free Acrylate Resins with Segregation Auxiliary Agents for Ultraviolet Nanoimprinting”
J. Vac. Sci. Technol. B 30, 06FB05 (2012)

T. Tomioka, S. Kubo, K. Nagase, M. Hoga, M. Nakagawa
“Fabrication of Au Nanorod and Nanogap Split-Ring Structures by Reactive-Monolayer-Assisted Thermal Nanoimprint Lithography involving Electrodeposition”
J. Vac. Sci. Technol. B 30, 06FB02 (2012)

S. Ito, C. M. Yun, K. Kobayashi, M. Nakagawa
“Surface Segregation of 1H,1H,9H-Hexadecafluorononyl Acrylate in Dimethacrylate Resin Films Cured by Exposure to Ultraviolet Light”
Chem. Lett. 41, 1294-1926 (2012)

S. Kubo, K. Nagase, M. Nakagawa
“Gold Mesh Structures with Controlled Aperture Ratios Fabricated by Reactive-Monolayer-Assisted Thermal Nanoimprint Lithography”
Chem. Lett. 41, 1291-1293 (2012)

S. Kubo, M. Nakagawa
“Gram-Scale Synthesis of Zinc Oxide Nanorods in Basic Ethanol Solutions”
Chem. Lett. 41, 1137-1138 (2012)

K. Nagase, S. Kubo, M. Nakagawa
“Photochemically Grafted Polystyrene Layer Assisting Selective Au Electrodeposition”
Langmuir 28, 11646-11653 (2012)

S. Kubo, M. Nakagawa
“Reactive-monolayer-assisted thermal nanoimprint lithography”
J. Photopolym. Sci. Technol. 25, 189-196 (2012)

B. Cai, T. Kim, O. Sugihara, K. Komatsu, T. Kaino
“Enhancement of luminescent intensity of calixarene-oxetane polymer doped with europium complex”
Opt. Mater. Express 2, 717-722 (2012)

S. Kaneko, K. Kobayashi, Y. Tsukidate, H. Hiroshima, S. Matsui, M. Nakagawa
“Morphological Changes in Ultraviolet-Nanoimprinted Resin Patterns Caused by Ultraviolet-Curable Resins Absorbing Pentafluoropropane”
Jpn. J. Appl. Phys. 51, 06FJ05 (2012)

C. M. Yun, S. Kudo, K. Nagase, S. Kubo, M. Nakagawa
“Silica/Ultraviolet-Cured Resin Nanocomposites for Replica Molds in Ultraviolet Nanoimprinting”
Jpn. J. Appl. Phys. 51, 06FJ04 (2012)

S. Iyoshi, M. Okada, T. Katase, K. Tone, K. Kobayashi, S. Kaneko, Y. Haruyama, M. Nakagawa, H. Hiroshima, S. Matsui
“Step and Repeat Ultraviolet Nanoimprinting under Pentafluoropropane Gas Ambient”
Jpn. J. Appl. Phys. 51, 06FJ08 (2012)

T. Fuchigami, R. Kawamura, Y. Kitamoto, M. Nakagawa, Y. Namiki
“A magnetically guided anti-cancer drug delivery system using porous FePt capsules”
Biomaterials 33, 1682-1687 (2012)

K. Kamata, S. Suzuki, M. Ohtsuka, M. Nakagawa, T. Iyoda, A. Yamada
“Fabrication of left-handed metal microcoil from spiral vessel of vascular plant”
Adv. Mater. 23, 5509-5513 (2011)

(2011)
B. Cai, O. Sugihara, H. I. Elim, T. Adschiri, T. Kaino
“A novel preparation of high-refractive-index and highly transparent polymer nanohybrid composites”
Appl. Phys. Exp. 4, 092601 (2011)

H. I. Elim, B. Cai, O. Sugihara, T. Kaino, T. Adschiri
“Rayleigh scattering study and particle density determination of high refractive index TiO2 nanohybrid polymer”
Phys. Chem. Chem. Phys 13, 4470-4474 (2011)

T. Fuchigami, R. Kawamura, Y. Kitamoto, M. Nakagawa, Y. Namiki
“Ferromagnetic FePt-Nanoparticles/Polycation Hybrid Capsules Designed for a Magnetically Guided Drug Delivery System”
Langmuir 27, 2923-2928 (2011)

M. Tagaya and M. Nakagawa
Photoassisted Fusion Behavior of Decanethiol-Passivated Gold Nanoparticles by Vacuum Ultraviolet Light Exposure”
Ind. Eng. Chem. Res. 50, 7398-7402 (2011)

Y. Namiki, T. Fuchigami, N. Tada, R. Kawamura, S. Matsunuma, Y. Kitamoto, M. Nakagawa
“Nanomedicine for Cancer: Lipid-Based Nanostructures for Drug Delivery and Monitoring”
Acc. Chem. Res. 44, 1080-1093 (2011)

K. Kobayashi, S. Kubo, H. Hiroshimia, S. Matsui, M. Nakagawa
“Fluorescent Microscopy Proving Resin Adhesion to a Fluorinated Mold Surface Suppressed by Pentafluoropropane in Step-and-Repeat Ultraviolet Nanoimprinting”
Jpn. J. Appl. Phys. 50, 06GK02 (2011)

S. Kubo, Y. Sato, Y. Hirai, M. Nakagawa
“Resist Pattern Inspection Using Fluorescent Dye-Doped Polystyrene Thin Films in Reactive-Monolayer-Assisted Thermal Nanoimprint Lithography”
Jpn. J. Appl. Phys. 50, 06GK10 (2011)

S. Kudo, K. Nagase, S. Kubo, O. Sugihara, M. Nakagawa
“Optically Transparent and Refractive Index-Tunable ZrO2/Photopolymer Composites Designed for Ultraviolet Nanoimprinting”
Jpn. J. Appl. Phys. 50, 06GK12 (2011)

(2010)
K. Kobayashi, S. Kubo, S. Matsui, M. Nakagawa
“Facile wide-scale defect detection of UV-nanoimprinted resist patterns by fluorescent microscopy”
J. Vac. Sci. Technol. B 28, C6M50 (2010)

F. S. Tan, O. Sugihara, T. Kaino
“Encircled Flux-based optimized simple launch condition for standardization of multimode polymer optical waveguide evaluations”
Opt. Exp. 18, 23554-23561 (2010)

S. Kubo, M. Nakagawa
“Growth behaivior of an adsorbed monolayer from a benzophenone-containing trimethoxysilane derivative on a fused silica surface by chemical vapor surface modification”
Jpn. J. Appl. Phys. 49, 06GL03 (2010)

K. Nagase, S. Kubo, M. Nakagawa
“Resist properties of thin poly(methyl methacrylate) and poly(styrene) films patterned by thermal nanoimprint lithography for Au electrodeposition”
Jpn. J. Appl. Phys. 49, 06GL05 (2010)

K. Kobayashi, N. Sakai, S. Matsui, M. Nakagawa
“Fluorescent UV-curable resists for UV-nanoimprint lithography”
Jpn. J. Appl. Phys. 49, 06GL07 (2010)

A. Kono, N. Sakai, S. Matsui, M. Nakagawa
“Enhanced durability of antisticking layers by recoating a silica surface with fluorinated alkylsilane derivatives with chemical vapor surface modification”
Jpn. J. Appl. Phys. 49, 06GL12 (2010)

O. Sugihara, K. Takayama, J. S. Selvan, S. Shibata, T. Kaino, K. Hirano, T. Ushiwata, M. Morimoto, S. Yagi, T. Makino, Y. Matsui, K. Tajiri
“Polymer optical waveguide chip: new tool for simple evaluation of optical parameters of waveguide elements”
Photon. Tech. Lett. 22, 703-705 (2010)

K. Nagase, M. Kawashima, M. Nakagawa
“Semitransparent conductive thin porous Au films on a thiol-containing promer layer formed from Au nanoparticle ink”
J. Photopolym. Sci. Technol. 23, 265-268 (2010)

S. Korenaga, K. Kobayashi, A. Kohno, S. Kubo, and M. Nakagawa
“Formation of an adsorbed monolayer form pentafluorophenyltriethoxysilane and its antisticking property to a UV-curable resin studied by high-sensitive UV-visible spectroscopy”
J. Photopolym. Sci. Technol. 23, 59-64 (2010)

S. Kubo, T. Ohtake, E.-C. Kang, M. Nakagawa
“Reactive-monolayer-assisted thermal nanoimprint lithopgraphy with benzophenone-containing trimethoxysilane derivative for patterning thin chromium and copper films”
J. Photopolym. Sci. Technol. 23, 83-86 (2010)

(2009)
H. Oda, T. Ohtake, T. Takaoka, and M. Nakagawa
“Dewetting Photocontrol of Poly(styrene) Thin Films by a Photocrosslinkable Monolayer in Thermal Nanoimprint Lithography”
J. Photopolym. Sci. Technol. 22, 195-199 (2009)

K. Nagase, T. Ohtake, T. Takaoka, S. Kubo, and M. Nakagawa
“Optical Monitoring of a Poly(styrene) Residual Layer on a Photocrosslinkable Monolayer in Thermal Nanoimprint Lithography”
J. Photopolym. Sci. Technol. 22, 201-201 (2009)

T. Ohtake, H. Oda, T. Takaoka, and M. Nakagawa
“Photo-induced Graft Reactions of 4-Methoxybenzophenone with Thermoplastic Polymers Designed for Reactive-Monolayer-Assisted Thermal Nanoimprint Lithography”
J. Photopolym. Sci. Technol. 22, 205-211 (2009)

M. Nakagawa, N. Kamata, T. Iyoda, and S. Matsui
“Thermal Nanoimprint of a Polystyrene and Poly(4-vinylpyridine) Double-Layer Thin Film and Visualization Determination of Its Internal Structure by Transmission Electron Microscopy”
Jpn. J. Appl. Phys. 48, 06FH12 (2009)

H. Oda, T. Ohtake, T. Takaoka, and M. Nakagawa
“Photoreactive Chemisorbed Monolayer Suppressing Polymer Dewetting in Thermal Nanoimprint Lithography”
Langmuir 25, 6604-6606 (2009)

Y. Kurata, O. Sugihara, T. Kaino, K. Komatsu, N. Kambe
“Thermo-optic Controllable Hybrid Photonic Polymers Containing Inorganic Nanoparticles”
J. Opt. Soc. Am. B 26, 2377-2381 (2009)

H. I .Elim, B. Cai, Y. Kurata, O. Sugihara, T. Kaino, T. Adschiri, A. L. Chu, N. Kambe
“Refractive Index Control and Rayleigh Scattering Properties of Transparent TiO2 Nanohybrid Polymer”
J. Phys. Chem. B 113, 10143-10148 (2009)

著 書

中川勝
「ナノインプリントリソグラフィにおける光機能材料」
光機能性有機・高分子材料における新たな息吹(監修 市村國宏), 第8編第6章, 319-333, シーエムシー出版 (2019)
中村貴宏, 中川勝
「レーザー加工孔版印刷に基づく光ナノインプリント技術によるナノ・マイクロ造形法の開発」
プリンテッド・エレクトロニクスに向けた材料, プロセス技術の開発と最新事例, 第10章第6節, 356-362, 情報技術協会 (2017)
中川勝
「ナノインプリント材料技術」
半導体微細パターニング, 第Ⅱ編 ポスト光リソグラフィ技術, 第3章 ナノインプリント技術, 第5節, 173-184, エヌ・ティー・エス (2017)
中川勝
「離形技術」
ナノインプリント技術, 第7章 離型技術, 134-149, 電子情報通信学会 (2014)
久保祥一, 中川勝
「光機能」
高分子ナノテクノロジーハンドブック, 第3編 第1章 第2節, NTS (2014)
久保祥一
「グローイングポリマー:放浪しながら」
高分子, 62(8), 450 (2013)
久保祥一,田口怜,林田研一,成田麻美子,波多野慎悟,渡辺修,彌田智一,中川勝
「Scientific News:液晶配向膜で半導体無機ナノロッドの方向制御」
高分子, 62(8), 460 (2013)
小林敬,中川勝
「光ナノインプリント用離型剤」
ナノインプリントの開発とデバイス応用,第8章第2節,シーエムシー出版 (2011)
久保祥一,中川勝
「ナノインプリントパターン評価」
ナノインプリントの開発とデバイス応用,第10章第1節,シーエムシー出版 (2011)
杉原興浩
「マルチモードポリマー光導波路」
O plus E、32巻、1423-1427 (2010)
杉原興浩
「ナノ粒子分散ポリマーの創成と光学薄膜応用」
光アライアンス、21巻、10-14 (2010)
杉原興浩
「光ファイバーの基礎と応用展開」
加工技術、45巻、13-19 (2010)
杉原興浩
「ポリマー光回路」
光学材料の屈折率制御技術の最前線、第3編第4章、シーエムシー出版、107-115 (2009)
中川勝
「分子集合体による金属の無電解析出」
超分子サイエンス&テクノロジー、第3章第3節、エヌ・ティ・エス (2009)

解 説
中川勝
「ナノインプリント技術から見えてきた高分子薄膜の表面・界面の近傍」
高分子, 68(1), 24-28 (2019)
中村貴宏
「レーザー誘起核生成法より形成される金属・合金ナノ粒子」
Colloid & Interface Communication, 43(4), 34-37 (2018)
中村貴宏, 佐藤俊
「高強度レーザー励起反応場における金属・合金ナノ粒子の合成」
レーザー加工学会誌, 24(1), 1-6 (2017)
中川勝
「ナノインプリントリソグラフィの現状と今後の課題」
応用物理, 85(6), 480-484 (2016)
上原卓也, 久保祥一
「ナノインプリントリソグラフィによる可視光応答メタマテリアル作製」
月刊オプトロニクス, 33(8), 55-59 (2014)
伊東駿也, 中川勝
「易凝縮性ガス利用光ナノインプリントに適した光硬化性組成物の開発」
月刊オプトロニクス, 33(1), 90-95 (2014)
久保祥一, 中川勝
「光硬化性蛍光組成物によるナノインプリントプロセスの可視化」
月刊オプトロニクス, 33(1), 85-89 (2014)
竹中幹人, 中川勝
「誘導ナノ構造科学」
機能材料, 34(3), 3 (2014)
梅垣真祐,杉原興浩,佐々高史
「光と画像2013年:懐古展望と大予測-光機能性材料の今昔」
OplusE, 398, 28-30 (2013)
中川勝
「次世代エレクトロニクスデバイスの創出に資する革新材料・プロセス研究」
CREST領域ニュース, 11(1), (2012)
中川勝
「ナノインプリントリソグラフィにおける離型技術」
高分子, 61(9), 706-709 (2012)
杉原興浩
「書評:ナノインプリントの開発とデバイス応用」
光学, 41(12), 635 (2012)
中川勝
「特集の語り:エレクトロニクスの新時代を想像してみませんか?」
高分子, 61(3), 131 (2012)
中川勝,久保祥一
「ナノインプリントリソグラフィにおける光機能材料化学」
マテリアルインテグレーション,24(4-5),248-253 (2011)
杉原興浩
「高性能光機能性ポリマーの創成と光導波路デバイス」
マテリアルインテグレーション,24(4-5),254-255 (2011)
小林敬,中川勝
「光ナノインプリントリソグラフィ用蛍光レジスト」
月刊ディスプレイ,17(6),17-18 (2011)
杉原興浩、蔡斌、小松京嗣、戒能俊邦
「3次元光接続技術の展開」
エレクトロニクス実装学会誌, 12, 386-390 (2009)
戒能俊邦、杉原興浩、蔡斌
「非線形材料光導波路化の進展」
機能材料, 29, 68-78 (2009)
杉原興浩、戒能俊邦、小松京嗣
「電気光学ポリマーと光導波路デバイス」
光学, 38, 598-603 (2009)