論文

TOPページ >  論文

【2020年】

  • Shingo Ishihara*, Kizuku Kushimoto, Junya Kano
    Analysis of the Effect of Ventilation Bars on the Packing Structure of Sinter Bed by DEM Simulation
    Energies, 2020, 13(15), 3836 (2020.7)
    DOI:https://doi.org/10.3390/en13153836
  • Shingo ISHIHARA*, Ko-ichiro OHNO, Hirokazu KONISHI, Takashi WATANABE, Shungo NATSUI, Hiroshi NOGAMI and Junya KANO
    Prediction of Softening Behavior of Simulant Sinter Ore by ADEM-SPH Model
    ISIJ International, Vol.60, No.7, 1545-1550(2020.7)
    DOI:https://doi.org/10.2355/isijinternational.ISIJINT-2020-078
  • Shingo ISHIHARA* and Junya KANO
    Development of ADEM-SPH Coupling Model for Analysis of Solid to Liquid Phase Transition Behaviors
    ISIJ International, Vol.60, No.7, 1469-1478(2020.7)
    DOI:https://doi.org/10.2355/isijinternational.ISIJINT-2019-813
  • Kizuku Kushimoto*, Shingo Ishihara, Samuel Pinches, Mitchell L. Sesso, Shane P. Usher, George V. Franks, Junya Kano
    Development of a method for determining the maximum van der Waals force to analyze dispersion and aggregation of particles in a suspension
    Advanced Powder Technology, 31, 2267-2275 (2020.4)
    DOI:https://doi.org/10.1016/j.apt.2020.03.021
  • 近藤 光*, 石原真吾, 久志本築, 小澤隆弘, 加納純也, 内藤牧男
    遊星ボールミルによる液中粉砕結果とDEMシミュレーションにより算出した衝突エネルギー分布との関係
    粉体工学会誌, 57(4) 176-183 (2020.4)
    DOI:https://doi.org/10.4164/sptj.57.176

【2019年】

  • 髙橋功一*, 吉野 絢, 野内泰平, 加納純也, 石原真吾, 有山達郎
    気孔構造を考慮した離散要素法による高炉内コークス破壊現象のモデル化
    鉄と鋼, 105(12)10-19(2019.12)
    DOI:https://doi.org/10.2355/tetsutohagane.TETSU-2019-060
  • 河村順平*, 久志本築, 石原真吾, 加納純也
    食品粉体の流動挙動を支配する因子の探索と簡易付着力モデルシミュレーション
    粉体工学会誌, 56(11) 598-607(2019.11)
    DOI:https://doi.org/10.4164/sptj.56.598
  • 近藤 光*, 石原真吾, 久志本築, 小澤隆弘, 加納純也, 内藤牧男
    液中転動ボールミルの粉砕結果とDEMシミュレーションにより算出した衝突エネルギー分布との関係
    粉体工学会誌, 56(11) 608-614(2019.11)
    DOI:https://doi.org/10.4164/sptj.56.608
  • Shingo Ishihara*, Kozo Shinoda, Junya Kano
    Mechanochemical treatment to remove arsenic from copper ore
    Minerals, 9, 349 (2019.6)
    DOI:https://doi.org/10.3390/min9060349
  • Kizuku Kushimoto*, Shingo Ishihara, Junya Kano
    Development of ADEM–CFD model for analyzing dynamic and breakage behavior of aggregates in wet ball milling
    Advanced Powder Technology, 30, 1131-1140(2019.6)
    DOI:https://doi.org/10.1016/j.apt.2019.03.008
  • Shingo ISHIHARA* and Junya KANO
    ADEM Simulation for Analysis of Particle Breakage of Irregular Shaped Particles
    ISIJ International, 59(5) 820-827(2019.5)
    DOI:https://doi.org/10.2355/isijinternational.ISIJINT-2018-688
  • 渡邊 亮*, 久志本築, 石原真吾, 加納純也
    離散要素法における粒子摩擦係数および転がり摩擦係数の決定法
    粉体工学会誌, 56(4) , 218-225(2019.4)
    DOI:https://doi.org/10.4164/sptj.56.218
  • 近藤 光*, 石原真吾, 久志本築, 小澤隆弘, 加納純也, 内藤牧男
    液中転動ボールミルの粉砕結果とDEMシミュレーションによるボール挙動の分析との整合性の検討
    粉体工学会誌, 56(3), 148-155 (2019.3)
    DOI:https://doi.org/10.4164/sptj.56.148
  • 小野宏輔*, 久志本築, 石原真吾, 加納純也
    離散要素法による金属粉粒体の変形挙動シミュレーションの開発
    粉体工学会誌, 56(2), 58-65, (2019.2)
    DOI:https://doi.org/10.4164/sptj.56.58
  • 久志本築*, 森山美果, 下坂厚子, 白川善幸, 日高重助, 石原真吾, 加納純也
    巨視的誘電率による微粒子複合材料中の微粒子分散状態の計測【粉体工学会論文賞(第38回)】
    J. Soc. Powder Technol., Japan, 56, 4-14(2019)
    DOI:https://doi.org/10.4164/sptj.56.4

【2018年】

  • 久志本築*, 石原真吾, 加納純也
    湿式ボールミリングにおける媒体ボール間の砕料粒子挙動の解析
    粉体および粉末冶金, 65(10), 664-672(2018.10)
    DOI:https://doi.org/10.2497/jjspm.65.664
  • 石原真吾*, 久志本築, 加納純也, 内藤牧男
    ADEMシミュレーションモデルによる粉体圧縮成形における粉化・圧密挙動の解析
    粉体工学会誌, 55(9), 492-498(2018.9)
    DOI:https://doi.org/10.4164/sptj.55.492
  • Renata Khasenova*, Sergey Komarov, Shingo Ishihara, Junya Kano, V. Yu. Zadorozhnyy
    Discrete element method simulations of mechanical plating of composite coatings on aluminum substrates
    SURFACE & COATINGS TECHNOLOGY, 349, 949-958 (2018.9)
    DOI:https://doi.org/10.1016/j.surfcoat.2018.04.056

【2017年】

  • 池尾陽作*, 米澤敏男, 加納純也, 石原真吾
    連続遊星ミルによる再生細骨材製造における消費動力の推定
    廃棄物資源循環学会論文誌, 28, 68-75 (2017.4)
    DOI:https://doi.org/10.3985/jjsmcwm.28.68

【2016年】

【2015年】

  • 山本通典*, 石原真吾, 加納純也
    DEMシミュレーションを用いた回転ドラムにおける粒子形状が混合に及ぼす影響評価
    粉体工学会誌, 52(8), 445-452(2015.8)
    DOI:https://doi.org/10.4164/sptj.52.445

【2014年】

  • Kanatip Kumproa, Apinon Nuntiya, Qiwu Zhang, Junya Kano, Fumio Saito
    High-purity hydrogen gas production by catalytic thermal decomposition using mechanochemical treatment
    Inter. J. Hydrogen Energy, 39(31), 17554-17562(2014.10)
    DOI:https://doi.org/10.1016/j.ijhydene.2014.08.129
  • Wenyi Yuan*, Solihin, Qiwu Zhang, Junya Kano, Fumio Saito
    Mechanochemical formation of K-Si-Ca-O compound as a slow-release fertilizer
    Powder Technology, 260(7), 22-26(2014.7)
    DOI:https://doi.org/10.1016/j.powtec.2014.03.072
  • 曽田力央, 佐藤 英, 加納純也, 齋藤文良
    DEMによる湿式媒体撹拌ミル内摩耗粉発生量の予測法の開発
    粉体工学会誌, 51(6), 436-443(2014.6)
    DOI:https://doi.org/10.4164/sptj.51.436
  • 石原真吾*, 張 其武, 加納純也
    ADEMによる粒子破壊過程のシミュレーション
    粉体工学会誌, 51(6), 407-414(2014.6)
    DOI:https://doi.org/10.4164/sptj.51.407
  • Kunlun Zhang*, Jun Huang, Haizhu Wang, Gang Yu, Bin Wang, Shubo Deng,  Junya Kano and Qiwu Zhang
    Mechanochemical destruction of decabromodiphenyl ether into visible light photocatalyst BiOBr
    RSC Advances, 28(4), 14719-14724(2014.4)
    DOI:https://doi.org/10.1039/C3RA47738J

【2013年】

  • 山本通典*, 石原真吾, 加納純也
    高速粉体混合装置の羽根形状が混合に及ぼす影響
    粉体工学会誌, 50(12), 851-856(2013.12)
    DOI:https://doi.org/10.4164/sptj.50.851
  • Chikashi KAMIJO*, Masaki HARA, Yasuhide YAMAGUCHI, Masahide YOSHIKAWA, Junya KANO, Masaru MATSUMURA and Takazou KAWAGUCHI
    Technology for Productivity Improvement of Sintering Based on Designing of Composite Granulation and Bed Structure of Sinter Mixture
    ISIJ International, 53(9), 1497-1502(2013.9)
    DOI:https://doi.org/10.2355/isijinternational.53.1497
  • Shingo ISHIHARA*, Rikio SODA, Qiwu ZHANG, Junya KANO
    DEM Simulation of Collapse Phenomena of Packed Bed of Raw Materials for Iron Ore Sinter during Charging
    ISIJ International, 53(9), 1555-1560(2013.9)
    DOI:https://doi.org/10.2355/isijinternational.53.1555

【2012年】

  • 近藤 光*, 大村高弘, 阿部浩也, 加納純也, 内藤牧男(Akira Kondo*, Takahiro Ohmura, Hiroya Abe, Junya Kano, Makio Naito)
    FRPモルタル管廃材のリサイクルプロセスの研究開発 (Development of Recycling Process for Waste FRP Mortar Pipe)
    粉体工学会誌, 49(11), 827-831 (2012.11)
    DOI:https://doi.org/10.4164/sptj.49.827
  • 山根圭司*, 石原真吾, 曽田力央, 加納純也, 齋藤文良(Keiji Yamane*, Shingo Ishihara, Rikio Soda, Junya Kano, Fumio Saito)
    棒状粒子ふるい分け挙動のDEMシミュレーション (DEM Simulation of Sieving Process about Rod-like Particles)
    粉体工学会誌, 49(11), 818-826 (2012.11)
    DOI:https://doi.org/10.4164/sptj.49.818
  • Yasuhiro Yamamoto*, Rikio Soda, Junya Kano, Fumio Saito
    DEM simulation of bead motion during wet bead milling using an enlarged particle model
    International Journal of Mineral Processing, 93-99(2012.11)
    DOI:https://doi.org/10.1016/j.minpro.2012.10.001
  • 曽田力央*, 八木圭亮, 加納純也, 齋藤文良, 内藤牧男
    DEMによる機械的複合化過程の基礎的解析
    スマートプロセス学会誌,  5, 218-223(2012.9)
    DOI:https://doi.org/10.7791/jspmee.1.218
  • 夏井俊吾*, 昆 竜矢, 植田 滋, 加納純也, 井上 亮, 有山達郎, 埜上 洋
    粒子配置を考慮した充填層の熱物質移動解析【俵論文賞】
    鉄と鋼, 98(7), 341-350(2012.7)
    DOI:https://doi.org/10.2355/tetsutohagane.98.341
  • Shungo Natsui*, Rikio Soda, Tatsuya Kon, Shigeru Ueda, Junya Kano, Ryo Inoue,  Tatsuro Ariyama
    Wettability Model Considering Three-Phase Interfacial Energetics in Particle Method
    Material Transactions, 53(4), 662-670 (2012.4)
    DOI:https://doi.org/10.2320/matertrans.M2011330
  • Shungo Natsui*, Shigeru Ueda, Hiroshi Nogami, Junya Kano, Ryo Inoue, Tatsuro Ariyama
    Gas–solid flow simulation of fines clogging a packed bed using DEM–CFD
    Chemical Engineering Science, 71, 274-282 (2012)
    DOI:https://doi.org/10.1016/j.ces.2011.12.035
  • Yasuhiro Yamamoto*, Rikio Soda, Junya Kano, Fumio Saito
    Dispersion of carbon black by a media mill and correlation of its rate constant with beads impact energy
    Powder Technology, 219, 105-110 (2012)
    DOI:https://doi.org/10.1016/j.powtec.2011.12.024

【2011年以前】

  • 作成中
  • M. Nusheh, H.Yoozbashizadeh, M. Askari, N. Kuwata, J. Kawamura, J. Kano, F. Saito, H. Kobatake, H. Fukuyama
    Effect of Mechanical Milling on Carbothermic Reduction of Magnesia
    ISIJ International, 50(5), 668-672(2010) 
  • Shungo Natsui, Shigeru Ueda, Zhengyun Fan, Nils Andersson, Junya Kano, Ryo Inoue, Tatsuro Ariyama
  • Characteristics of Solid Flow and Stress Distribution Including Asymmetric Phenomena in Blast Furnace Analyzed by Discrete Element Method
    ISIJ International, 50, 207-214(2010)
  • Junya Kano, Miyuki Miyazaki, Fumio Saito
    Ball Mill Simulation and Powder Characteristics of Ground Talc in Various Types of Mill
    Advanced Powder Technology, 11, 333-342(2000)
  • Junya Kano, Hideaki Yabune, Hiroshi Mio, Fumio Saito
    Grinding of Talc Particulates by a High-speed Rotor Mixer
    Advanced Powder Technology, 12, 297-314(2001)
  • Junya Kano, Shu Saeki, Mitsuo Tanjo, Fumio Saito
    Reduction ina-Transformation Temperature of Gibbsite and Boehmite by Powder Mixing with Seed
    Journal of Chemical Engineering of Japan, 34, 595-599(2001)
  • Shu Saeki, Junya Kano, Fumio Saito, Kaoru Shimme, Seiichi Masuda, Tsuyoshi Inoue
    Effect of Additives on Dechlorination of PVC by Mechanochemical Treatmemt
    Journal of Material Cycles and Waste Management, 3, 20-23(2001)
  • Hiroshi Mio, Jaeryeong Lee, Takao Nakagawa, Junya Kano, Fumio Saito
    Estimation of Extraction Rate of Yttrium from Fluorescent Powder by Ball Milling
    Materials Transactions, JIM, 42(11), 2460-2464(2001)
  • Junya Kano, Hiroshi Mio, Fumio Saito, Miyuki Miyazaki
    Correlation of Grinding Rate of Gibbsite with Impact Energy in Tumbling Mill with Mono-size Balls
    Minerals Engineering, 14(10), 1213-1223(2001)
  • 宮崎 幸, 北村 真, 神谷昌岳, 加納純也, 齋藤文良(Miyuki Miyazaki, Makoto Kitamura, Masataka Kamitani, Junya Kano, Fumio Saito)
    水酸化アルミニウムの粉砕とそのセメント系硬化体特性に及ぼす効果 (Grinding Aluminum Hydroxide and its Effect on Properties of Hardened Cement Material Forming Calcium Aluminate)
    粉体工学会誌 (Journal of the Society of Powder Technology, Japan), 38, 331-337(2001)
  • Hiroshi Mio, Shu Saeki, Junya Kano, Fumio Saito
    Estimation of Mechanochemical Dechlorination Rate of Poly(vinyl chloride)
    Environmental Science and Technology, 36(6), 1344-1348(2002)
  • Hiroshi Mio, Junya Kano, Fumio Saito, Kantaro Kaneko
    Effects of Rotational Direction and Rotation-to-Revolution Speed Ratio in Planetary Ball Milling
    Materials Science and Engineering A, 332, 75-80(2002)
  • Tsuyoshi Inoue, Miyuki Miyazaki, Masataka Kamitani, Junya Kano, Fumio Saito
    Mechanochemical dechlorination of polyvinyl chloride by co-grinding with various metal oxides
    Advanced Powder Technology, 15(2), 215-225(2004)
  • Hiroshi Mio, Junya Kano, Fumio Saito
    Scale-up Method of Planetary Ball Mill
    Chemical Engineering Science, 59, 5883-5890(2004)
  • Hiroshi Mio, Junya Kano, Fumio Saito, Kantaro Kaneko
    Optimum revolution and rotational directions and their speeds in planetary ball milling
    International Journal of Mineral Processing, (2004.7)
  • Fumio Saito, Qiwu Zhang, Junya Kano
    Mechanochemical approach for preparing nanostructural materials
    Journal of Materials Science, 39, 5051-5055(2004)
  • Hiroto Mori, Hiroshi Mio, Junya Kano, Fumio Saito
    Ball mill simulation in wet grinding using a tumbling mill and its correlation to girnding rate
    Powder Technology, 143-144, 230-239(2004.4)
  • 井上 毅, 加納 純也, 齋藤 文良(Tsuyoshi Inoue, Junya Kano, Fumio Saito)
    塩素含有率の異なるPVCのメカノケミカル脱塩素 (Mechanochemical Dechlorination of PVCs with Different Chlorine Contents)
    粉体工学会誌 (Journal of the Society of Powder Technology, Japan), 41(11), 20-25(2004)
  • 井上 毅, 加納 純也, 齋藤 文良(Tsuyoshi Inoue, Junya Kano, Fumio Saito)
    塩素含有率の異なるPVC のメカノケミカル脱塩素
    粉体工学会誌 (Journal of the Society of Powder Technology, Japan), 41(11), 801-811(2004.11)
  • Tsuyoshi Inoue, Miyuki Miyazaki, Masataka Kamitani, Junya Kano, Fumio Saito
    Dechlorination of polyvinyl chloride by its grinding with KOH and NaOH
    Advanced Powder Technology, 16(1), 27-34(2005)
  • Junya Kano, Eiki Kasai, Fumio Saito, Takazo Kawaguchi
    Numerical Simulation Model for Granulation Kinetics of Iron Ores
    ISIJ International, 45(4), 500-505(2005.4)
  • Dariusz Gudin, Roman Turczyn, Hiroshi Mio, Junya Kano, Fumio Saito
    Simulation of the Movement of Beads by the DEM with Respect to the Wet Grinding Process
    AIChE JOURNAL, 52(10), 3421-3426(2006.10)
  • Thuyoshi Inoue, Junya Kano, Fumio Saito
    Influence of polymer impurity on the mechanochemica